UV printing on ABS plastic

Lego bricks, housings, phone cases, toys, consumer parts. What the printer and primer makers publish about ABS plastic: primer, white ink, flat or rotary, how long prints last and what goes wrong.

Updated October 11, 2026 · This page has affiliate links: we may earn a commission, at no cost to you. As an Amazon Associate we earn from qualifying purchases. How we make money

Desktop UV: Prints as is
Primer: Helps
White ink: On dark or clear
Shape: Flat or curved

Plastics and rubber. Things people make: Lego bricks, housings, phone cases, toys, consumer parts. From the sources at the end, checked October 11, 2026; we haven't tested it ourselves.

What it needs

Desktop UV printers: Prints as is xTool names ABS among the plastics that work best and LogoJET calls it a high surface energy plastic that bonds UV ink well. [1] [2]
Primer or adhesion promoter: Helps. xTool lists glossy ABS under its Acrylic Primer; other ABS is not listed as needing one. [3]
White ink: On dark or clear. xTool: white ink is most important on clear plastics, colored plastics and dark surfaces. [4]
Flat or curved: Flat or curved. eufyMake lists it for both its flatbed and rotary-attachment material tables. Flatbed height limit 60 mm; rotary takes round objects 45-100 mm wide, 80-245 mm tall. [5] [6]

How long it lasts

Dishwasher: xTool says its UV ink layer cannot withstand dishwasher cycles (general statement, not specific to this plastic). [3]
Outdoors: eufyMake says UV prints on plastic can be used outdoors (license plates, pool labels); the statement is not specific to this plastic. [7]
Scratches and wear: xTool: with primer, normal wiping and handling will not remove the ink; keys, blades or sanding will. A UV varnish coat is its top suggestion. [3]

What goes wrong

Whole print peels off when primer is missing, the wrong type, or the surface was not cleaned (xTool).

[3]

Before you print

Wipe with isopropyl alcohol before printing (xTool, eufyMake).
Print a test on the actual part first; results vary by maker and finish (Longer).

[3] [4] [8]

Supplies

Look for an adhesion promoter sold for UV printing on ABS plastic, and read its data sheet for how long to let it dry: adhesion promoter (Amazon US), adhesion promoter (Amazon UK). Clean with isopropyl alcohol wipes first. Test one piece before a batch.

Every material in one table: what a UV printer can print on. Weighing up other machines? See UV against DTF, sublimation and a Cricut.

Has a maker published something different, or does your printer's manual disagree? Email hello@homeuvprinter.com and we'll check it against the source.

Sources

Checked October 11, 2026.