UV printing on golf balls

Logos, names, event or gift balls. What the printer and primer makers publish about golf balls: primer, white ink, flat or rotary, how long prints last and what goes wrong.

Updated October 11, 2026 · This page has affiliate links: we may earn a commission, at no cost to you. As an Amazon Associate we earn from qualifying purchases. How we make money

Desktop UV: With prep
Primer: Helps
White ink: On dark or clear
Shape: Rotary or curved

Everyday objects. Things people make: logos, names, event or gift balls. From the sources at the end, checked October 11, 2026; we haven't tested it ourselves.

What it needs

Desktop UV printers: With prep Makers list golf balls as a standard job; eufyMake wipes the ball and sands it if slick, and says the ink can wear off with heavy use. [1] [4]
Primer or adhesion promoter: Helps. Adhesion promoter made for plastics (eufyMake) [1]
White ink: On dark or clear. eufyMake says a single CMYK layer is enough in most cases; LogoJET recommends white plus color on colored balls and color only on white balls. [1] [2]
Flat or curved: Rotary or curved. Balls roll, so they need a holder: a foam holder with a round cut-out or a 3D-printed jig (eufyMake), or print trays (LogoJET). eufyMake also mentions pairing a holder with its rotary attachment; Roland uses Distance Mode for spherical items. Keep the design within about 20-25 mm and off deep dimples. [1] [2] [3] [4]

How long it lasts

Scratches and wear: eufyMake says ink may wear off if the ball is hit hard or used a lot; LogoJET says a clear gloss varnish adds abrasion resistance. [1] [2]

What goes wrong

Smearing or poor adhesion when the surface is too glossy or oily.
Blurry print when the ball moves during printing.
Warped design when it is wider than about 20-25 mm.
Ink can wear off over time with heavy use.

[1]

Before you print

Wipe with isopropyl alcohol, then lightly sand if the ball still feels slick.
Test on old balls first and print on the top of the ball rather than wrapping it.
Try not to print over the deep dimples.
Add a clear gloss varnish layer for extra abrasion resistance (LogoJET).

[1] [2]

Supplies

Look for an adhesion promoter sold for UV printing on golf balls, and read its data sheet for how long to let it dry: adhesion promoter (Amazon US), adhesion promoter (Amazon UK). Clean with isopropyl alcohol wipes first. Test one piece before a batch.

Every material in one table: what a UV printer can print on. Weighing up other machines? See UV against DTF, sublimation and a Cricut.

Has a maker published something different, or does your printer's manual disagree? Email hello@homeuvprinter.com and we'll check it against the source.

Sources

Checked October 11, 2026.